
Steel and metals
Stainless steel pipes and tubes
Grades 201, 304 and 316L, welded and seamless, polished or pickled
- Supplied by
- MARS International
- Types and grades
- Grade 201, Grade 304 and 304L, Grade 316 and 316L
- Pricing
- Quoted per order and specification
Overview
Stainless steel pipes and tubes from MARS International
MARS International supplies stainless steel (SS) pipes and tubes for process plants, water lines, construction and fabrication. Grades 201, 304/304L and 316/316L are available in welded and seamless form, in round, square and rectangular sections.
Industrial pipe is supplied to ASTM A312 in standard schedules, pickled or bright annealed. Ornamental and structural tube is supplied to ASTM A554 with a satin, mirror or hairline polish for railings, furniture and kitchen equipment. Sanitary tube to ASTM A270 is available for food and dairy lines.
Pipes are sourced from established mills, and each shipment comes with mill test certificates showing heat number, chemistry and mechanical properties. Independent inspection, including grade verification, can be arranged before shipment.
Supplied by MARS International, part of Swiss MARS Group.
Range
Types and grades
What we can source. Tell us which suits your use, or ask us to recommend one.
Grade 201
A lower-nickel grade with good strength and a bright finish, for indoor decorative uses such as railings, furniture and kitchen frames.
Grade 304 and 304L
The general-purpose stainless grade for food plants, water lines, architecture and kitchens. 304L has lower carbon, to resist corrosion at welds.
Grade 316 and 316L
Contains molybdenum for better resistance to chlorides, for coastal sites, marine use and chemical and pharmaceutical lines.
Ornamental tube (ASTM A554)
Welded round, square and rectangular tube with a satin, mirror or hairline polish for balustrades, handrails, furniture and fit-out.
Industrial pipe (ASTM A312)
Welded and seamless pipe in standard schedules for pressure, process and utility lines, pickled or bright annealed.
Specifications
Typical specifications
| Grades | 201, 304, 304L, 316 and 316L |
|---|---|
| Types | Welded and seamless |
| Shapes | Round, square and rectangular |
| Pipe sizes | 1/8–24 inch NPS; schedules 5S, 10S, 40S and 80S |
| Tube sizes | Round 9.5–219 mm OD; square and rectangular from 10 × 10 mm to 100 × 200 mm |
| Tube wall thickness | 0.6–3.0 mm |
| Finishes | Pickled, bright annealed, satin (180–320 grit), mirror (400–600 grit) and hairline |
| Standards | ASTM A312, A554, A269 and A270 |
| Length | 6 m standard; 5.8 m to fit 20 ft containers; cut lengths on request |
Applications
Where it is used
- Food and beverage plants
- Pharmaceutical and chemical lines
- Water treatment and plumbing
- Railings, balustrades and facades
- Commercial kitchens and catering equipment
- Furniture and fit-out
- Coastal and marine structures
- Mill test certificates to EN 10204 3.1 come with each shipment, showing heat number, chemical composition and mechanical properties.
- Before shipment, pipes are checked for dimensions, wall thickness, finish and marking. Independent inspection, including positive material identification (PMI) of the grade, can be arranged on request.
- Pipes are packed in hexagonal bundles with steel straps and woven covers. Polished tube is sleeved piece by piece to protect the finish, and pipe ends are capped.
- Documents include the commercial invoice, packing list, certificate of origin and mill test certificates.
- Grades, sizes, schedules and finishes are confirmed on each quotation, on FOB, CFR or CIF terms as requested.
How ordering works
From enquiry to delivery
Step 1: Enquiry and specification
You tell us the product, grade, quantity, delivery point and timing. We confirm the specification in writing, with samples or data sheets where the product needs them.
Step 2: Sourcing and quotation
We approach suitable manufacturers and send a quotation with price, Incoterms, payment terms, lead time and validity. Where an alternative meets the specification at a better cost or lead time, we offer it too.
Step 3: Contract, inspection and shipping
Once the contract and payment terms, such as a letter of credit, are in place, the order goes into production. Pre-shipment inspection, packing and shipping documents are handled as agreed per contract.
Step 4: Delivery and after-sales
We coordinate customs clearance and delivery to your site, with the group’s logistics company where needed. We remain your contact for warranty claims, shortfalls and repeat orders.
Questions
Buyers often ask
Anything else? Send us your question with the product, quantity and delivery port.
Ask a questionShould I choose grade 201 or 304?
Grade 201 costs less and works well for dry, indoor decorative uses. For anything in contact with water, food or outdoor air, 304 is the safer choice, and 316 is better near the sea or with chemicals.
Can the grade be verified before shipment?
Yes. Every shipment comes with mill test certificates, and an independent inspector can check the grade with a handheld PMI analyser and witness dimensional checks before loading.
Do you supply welded or seamless pipe?
Both. Welded pipe and tube cover most structural, decorative and utility uses at a lower cost. Seamless pipe is used for higher pressures and critical process lines.
Which standards do you supply to?
Typically ASTM A312 for industrial pipe, ASTM A554 for ornamental and structural tube, and ASTM A269 or A270 for general and sanitary tubing. The standard for each item is stated on the quotation.
More from the group
Other products
- ERW mild steel pipes and hollow sections, black or galvanised, for structures, scaffolding and water lines.
Steel and metals
- Hot-rolled steel coil in structural, high-strength and pipe-making grades for pipe mills, re-rolling and fabrication.
Steel and metals
- Large-diameter steel pipe sections and fabricated vessels, sourced from partner plants for industrial projects.
Steel and metals
- Large decorative sheets in marble, wood, solid and metallic finishes for feature walls, ceilings, receptions and shops.
Interior materials
- Decorative HPL sheets in wood, marble, stone and solid colours for furniture, counters and wall cladding.
Interior materials
- Cast and extruded acrylic (PMMA) sheets in clear, opal, coloured and mirror finishes for signage, displays and fit-out.
Interior materials
- White PVA wood glue, laminate, contact and construction adhesives for joinery, furniture making and panel installation.
Interior materials
- Hospital furniture, patient monitoring, diagnostic, operating theatre and laboratory equipment, and medical consumables.
Healthcare
- Street and architectural lighting from Fael Luce of Italy, for which MARS International is the local agent in Bangladesh.
Industrial and energy
- Sourcing and supply of gas, diesel and octane for projects and industry, subject to licensing in Bangladesh.
Industrial and energy
- Wheat, rice, sugar, onions and other agricultural commodities, in bulk or bags, with independent inspection.
Agricultural commodities
- PS and PVC fluted wall panels in wood, marble, stone and metallic finishes, in 21 profile series.
Interior materials
Need SS pipes?
Send the specification, quantity, delivery port and timing. We’ll reply with availability, price and lead time.

