
Interior materials
Adhesives and glue
Wood glue and adhesives for furniture, joinery and fit-out
- Supplied by
- MARS International
- Types and grades
- White PVA wood glue, Laminate and veneer glue, Contact adhesive
- Pricing
- Quoted per order and specification
Overview
Adhesives and glue from MARS International
MARS International supplies adhesives to furniture factories, joinery workshops and interior contractors. The core product is white PVA (latex) wood glue, the water-based glue used for joints, veneers and laminates in almost every woodworking shop.
Alongside it we supply laminate and veneer glues for press work, solvent-based contact adhesives for edges and curved surfaces, hot-melt edge-banding adhesive, and high-grab construction adhesives for fixing wall panels, skirting and mouldings.
Each product comes with its technical and safety data sheets. Samples can be sent so you can test the adhesive on your own boards and laminates before ordering in volume.
Supplied by MARS International, part of Swiss MARS Group.
Range
Types and grades
What we can source. Tell us which suits your use, or ask us to recommend one.
White PVA wood glue
Water-based glue for joints, dowels and general woodwork. Available in interior (D2) and water-resistant (D3) grades.
Laminate and veneer glue
Higher-solids PVA for pressing HPL and veneer onto board in cold or hot presses, with a short pressing time.
Contact adhesive
Solvent-based adhesive applied to both surfaces for an instant bond. Used for laminate edges, post-formed counters, foam and rubber.
Construction and panel adhesive
High-grab adhesive in cartridges for fixing wall panels, skirting and mouldings to masonry, plaster and board.
Hot-melt edge-banding adhesive
EVA granules for automatic and manual edge-banding machines in furniture production.
Specifications
Typical specifications
| PVA solids content | 40–55%, by grade |
|---|---|
| PVA viscosity | 8,000–20,000 mPa·s at 25 °C |
| Open time | 5–15 minutes for PVA at 25 °C |
| Clamping time | 20–60 minutes; full strength after 24 hours |
| Water resistance | EN 204 class D2 or D3, by grade |
| Contact adhesive solids | 18–30% |
| Pack sizes | 1–25 kg pails and 200 kg drums (PVA); 1–15 litre tins (contact); 300 ml cartridges |
| Shelf life | 6–12 months in sealed packs, stored at 5–30 °C |
Applications
Where it is used
- Furniture factories
- Joinery and carpentry
- Laminate and veneer pressing
- Wall panel and moulding installation
- Doors and kitchen cabinets
- Interior fit-out contractors
- Adhesives are supplied in sealed pails, drums, tins and cartridges, packed in cartons where needed, then palletised and stretch-wrapped.
- Water-based glues must be kept from freezing. Solvent-based contact adhesives are flammable and ship as dangerous goods, with the required labels and safety data sheets.
- Every product comes with a technical data sheet and a safety data sheet (SDS), and each pack carries a batch number and production date.
- Samples can be sent for trials on your own materials before you order in volume.
- Grades, pack sizes and specifications are confirmed on each quotation.
How ordering works
From enquiry to delivery
Step 1: Enquiry and specification
You tell us the product, grade, quantity, delivery point and timing. We confirm the specification in writing, with samples or data sheets where the product needs them.
Step 2: Sourcing and quotation
We approach suitable manufacturers and send a quotation with price, Incoterms, payment terms, lead time and validity. Where an alternative meets the specification at a better cost or lead time, we offer it too.
Step 3: Contract, inspection and shipping
Once the contract and payment terms, such as a letter of credit, are in place, the order goes into production. Pre-shipment inspection, packing and shipping documents are handled as agreed per contract.
Step 4: Delivery and after-sales
We coordinate customs clearance and delivery to your site, with the group’s logistics company where needed. We remain your contact for warranty claims, shortfalls and repeat orders.
Questions
Buyers often ask
Anything else? Send us your question with the product, quantity and delivery port.
Ask a questionWhat is the difference between D2 and D3 wood glue?
The classes come from EN 204, the European standard for the durability of wood adhesives. D2 is for interiors where the wood stays mostly dry. D3 adds resistance to frequent short exposure to water and high humidity, so it suits kitchens, bathrooms and covered outdoor use.
Which adhesive should I use for HPL?
For pressing HPL onto board in a press, use laminate glue (PVA). For edges, curved and post-formed surfaces, or work without a press, use contact adhesive applied to both surfaces.
How long can the adhesives be stored?
Typically 6–12 months in sealed packs, kept out of direct sun at 5–30 °C. The shelf life of each product is given on its data sheet.
Can you supply in bulk?
Yes. PVA glue can be supplied to factories in 200 kg drums or 1,000 kg IBC tanks. Pack sizes are confirmed on the quotation.
More from the group
Other products
- Large decorative sheets in marble, wood, solid and metallic finishes for feature walls, ceilings, receptions and shops.
Interior materials
- Decorative HPL sheets in wood, marble, stone and solid colours for furniture, counters and wall cladding.
Interior materials
- Cast and extruded acrylic (PMMA) sheets in clear, opal, coloured and mirror finishes for signage, displays and fit-out.
Interior materials
- PS and PVC fluted wall panels in wood, marble, stone and metallic finishes, in 21 profile series.
Interior materials
- Stainless steel pipes and tubes in grades 201, 304 and 316(L), welded and seamless, round, square and rectangular.
Steel and metals
- ERW mild steel pipes and hollow sections, black or galvanised, for structures, scaffolding and water lines.
Steel and metals
- Hot-rolled steel coil in structural, high-strength and pipe-making grades for pipe mills, re-rolling and fabrication.
Steel and metals
- Hospital furniture, patient monitoring, diagnostic, operating theatre and laboratory equipment, and medical consumables.
Healthcare
- Street and architectural lighting from Fael Luce of Italy, for which MARS International is the local agent in Bangladesh.
Industrial and energy
- Sourcing and supply of gas, diesel and octane for projects and industry, subject to licensing in Bangladesh.
Industrial and energy
- Large-diameter steel pipe sections and fabricated vessels, sourced from partner plants for industrial projects.
Steel and metals
- Wheat, rice, sugar, onions and other agricultural commodities, in bulk or bags, with independent inspection.
Agricultural commodities
Need industrial glue?
Send the specification, quantity, delivery port and timing. We’ll reply with availability, price and lead time.
